Compact Semiconductor Fan Heater
CSF 028 | 250 W, 400 W

  • Small, compact design
  • Integrated pre-set thermostat
  • Dynamic heating up
  • Touch-safe
  • Quick connection
  • Clip or screw flange fixing

The compact fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The touch-safe plastic housing and the small dimensions makes it ideal for use in enclosures with high packing density. The CSF 028 is equipped with a pre-set thermostat. It is connected via external clamps. The fan heater is available with two different mounting systems - either mounting by screw flange or by clip. The robust screw flange fixing is particularly suitable for applications with high vibration.

Heating elementPTC resistor - temperature limiting
Temperature safety cut-outto protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearingair flow, free flow
CSF 028: 45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
Connection2-pole dual pressure clamp for rigid wire 2.5mm²,
stranded wire (with wire end ferrule) 1.5mm²
Casingplastic according to UL94 V-0, black
Mountingclip for 35mm DIN rail, EN 60715 or screw fixing (Ø 5.5mm),
clamping torque 2Nm max., washers have to be used
Fitting positionvertical airflow (air outlet up)
Dimensionsmodels with clip fixing: 105 x 85 x 118mm,
models with screw flange fixing: 105 x 115 x 108mm
Weight0.5kg
Operating/Storage temperature-40 to +70°C (-40 to +158°F)/-45 to +70°C (-49 to +158°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection type/Protection classIP20 / II (double insulated)

To top

Art. No. clip fixingArt. No. screw flange fixingOperating voltageHeating capacity¹Inrush current max.Recommended
pre-fuse T (time-delay)
Switch-off temperature²Switch-on temperature²        Approvals

02821.0-0602821.0-08230VAC, 50/60Hz250W9.0A10.0A+15°C (+59°F)+5°C (+41°F)VDEUL File No. E234324EAC
02821.0-0902821.0-11230VAC, 50/60Hz250W9.0A10.0A+25°C (+77°F)+15°C (+59°F)VDEUL File No. E234324EAC
02820.0-0602820.0-08230VAC, 50/60Hz400W15.0A16.0A+15°C (+59°F)+5°C (+41°F)VDEUL File No. E234324EAC
02820.0-0902820.0-11230VAC, 50/60Hz400W15.0A16.0A+25°C (+77°F)+15°C (+59°F)VDEUL File No. E234324EAC
02821.9-0602821.9-08120VAC, 50/60Hz250W6.0A10.0A+15°C (+59°F)+5°C (+41°F)   -UL File No. E234324EAC
02821.9-0902821.9-11120VAC, 50/60Hz250W6.0A10.0A+25°C (+77°F)+15°C (+59°F)   -UL File No. E234324EAC
02820.9-0602820.9-08120VAC, 50/60Hz400W9.0A10.0A+15°C (+59°F)+5°C (+41°F)   -UL File No. E234324EAC
02820.9-0902820.9-11120VAC, 50/60Hz400W9.0A10.0A+25°C (+77°F)+15°C (+59°F)   -UL File No. E234324EAC

¹ at +20°C (+68°F) ambient temperature; ² tolerance of ±5K
Note: Other switch-off and switch-on temperatures on request.

To top

Accessories


Air duct for improved heat distribution


The air duct is an accessory part for use with the fan heater CSF 028. It can easily be clipped onto the protective grille of the fan heater without use of any tools, and diverts the exiting warm air by 45°. This results in an overall improved heat distribution within an enclosure or cabinet. The temperature above the protective grille is reduced by up to 20 °C (measured 100 mm above protective grille) and may make the use of a heat conduction plate obsolete.

Art. No. Dimensions²Plastic1 Packing unitWeight (approx.)
25201785 x 85 x 12 mmaccording to UL94 V-0, black1 piece35 g

² Dimensions when mounted on fan heater.

Air duct Art. No. 252017
Fan heater with air duct

Technical drawings - Clip fixing

To top

Screw flange fixing